Cam Cover questions and other stuff - ZR-1 Net Registry Forums

-=Jeff=- · 11-01-2014

So I was looking at the motor today and it looks like the cam cover or seeping oil on the front of the motor.

I might pull them off to reseal them this winter but was curious if you need to put any sealer on the round 'buttons' on the ends..

I also have an odd sound that I have not heard before, I think it is the water pump and the noise from it is resonating through the motor. I pulled the cap off the surge tank and it seemed low, so I think I have a coolant leak somewhere as well.

I really need to find the oil leak or the source of it. I am hoping to do so this winter/ early spring, my first task is to install the antenna wire and finish some things with the interior first. move to the engine and then hopefully get a round to fixing the e-brake.. the e-brake barely hold the car when there is even a very slight pitch.

I also modified my Jack Adapter from Corvette Gadget Man to work with a bottle jack on my Kwik Lift

11-01-2014	#1
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,156	Cam Cover questions and other stuff So I was looking at the motor today and it looks like the cam cover or seeping oil on the front of the motor. I might pull them off to reseal them this winter but was curious if you need to put any sealer on the round 'buttons' on the ends.. I also have an odd sound that I have not heard before, I think it is the water pump and the noise from it is resonating through the motor. I pulled the cap off the surge tank and it seemed low, so I think I have a coolant leak somewhere as well. I really need to find the oil leak or the source of it. I am hoping to do so this winter/ early spring, my first task is to install the antenna wire and finish some things with the interior first. move to the engine and then hopefully get a round to fixing the e-brake.. the e-brake barely hold the car when there is even a very slight pitch. I also modified my Jack Adapter from Corvette Gadget Man to work with a bottle jack on my Kwik Lift __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 Last edited by -=Jeff=-; 11-01-2014 at 11:43 PM.