ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-18-2014   #21
8cam
 
Join Date: Jul 2013
Location: Atlanta
Posts: 451
Default Re: missing/rough running

Work has meant I have not been able to get into the garage and really dig into the problem, luckily I have another car to drive. I finally got some time this afternoon (what a gorgeous fall day here) and pulled the plenum for the first time, took about an hour.

Do I get some kind of scout badge for this right of passage?

So yeah, it's dirty. I verified that all the plug wires are right around 11-12k ohms, way under the FSM's 30k limit, so they are fine. There's no doubt the coils are original, 24 years old with almost 50k on them. The 5/8 coil has a crack in the body, and those were the two showing the strongest spark!

In any case, I've read you can't really "test" a coil without a very expensive piece of equipment, but is there a decent indicator? The 4/7 coil ohms out to 5.35k and is the lowest by a decent margin. The others are right around 5.7k.

I also found a split intake manifold gasket and a bad/oily MAP sensor tube, so those will also be replaced. Jerry is getting a call.

__________________
Mark
'90 ZR-1 #1322 Daily Driver, 64k and counting
Black/Gray
[IMG]http://i208.photobucket.com/albums/bb49/mlitherland/IMG_0326_zps3d50d8cb.jpg[/IMG]
8cam is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020