Oil pan bolts

[Dynomite]

Originally Posted by Vetman

Thanks. I will order from jerry! Is this a relatively easy job?

Replacing the Oil Cooler Hose Assembly is very easily accomplished. Use a small socket (to remove the bolt holding the Oil Cooler Hose Assembly to the Oil Cooler) and use an open end of appropriate size for the hose assembly Nuts screwed onto the Oil Filter Adapter. There are two "O" rings on the Oil Cooler Adapter to Oil Cooler.

Tightening the OPRV Valve (Oil Pressure Regulating Valve) Cover Plate bolts is another story because of lack of access