ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-19-2014   #9
spork2367
 
Join Date: Jun 2013
Location: PA
Posts: 879
Default Re: LT5 full rebuild

Quote:
Originally Posted by Schrade View Post
If the DMF springs are loose, or wasted, it COULD mean many miles were done at lower rpm's - hard to know for sure tho'.

Tight DMF likely could mean a little less 'conservative' driving history...

Good snappics too! Always fun to look at builds!
Car was driven hard at least once....


Truthfully, the only evidence of this demise as far as the motor was concerned was one small gouge in the air horn and a small piece of safety glass in the valley. I'd be curious to know what the story of the car was before Dave owned it, and who pulled the motor. Every single electrical connector on the top of the motor was broken. Someone had the upper intake off and about half of the vacuum lines were missing or broken. Some bolts were replaced with non OEM bolts, and a few of the missing ones were laying in the valley....lol.

The accel injectors Dave put in/had put in were there. Plug wires were replaced at some point, with several being off the coils when I pulled the plenum. And whoever replaced the spark plugs never replaced the back two...
Attached Images
File Type: jpg IMG_0064.jpg (56.7 KB, 39 views)

Last edited by spork2367; 08-19-2014 at 01:02 PM.
spork2367 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020