Lug nut covers - ZR-1 Net Registry Forums

XfireZ51 · 07-14-2014

Some of you are using the C6Z wheels on your C4, as I am. Due to the rear offset and use of a spacer, I installed longer wheel studs (GM Racing) for extra safety. That forces the use of open back lug nuts but the nut covers barely thread on. In particular, I am using the GM wheel lock and that makes it necessary to drill the cap so the wheel stud has room to poke thru. One other point, the plastic caps SUCK. Unless you leave them black, any "chrome" or paint ultimately flakes off.

What are lug/cap combo is any else using for these wheels? Recommendation? I've been looking for the CTS-V caps which are supposed to be metal, not plastic.

07-14-2014	#1
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,707	Lug nut covers Some of you are using the C6Z wheels on your C4, as I am. Due to the rear offset and use of a spacer, I installed longer wheel studs (GM Racing) for extra safety. That forces the use of open back lug nuts but the nut covers barely thread on. In particular, I am using the GM wheel lock and that makes it necessary to drill the cap so the wheel stud has room to poke thru. One other point, the plastic caps SUCK. Unless you leave them black, any "chrome" or paint ultimately flakes off. What are lug/cap combo is any else using for these wheels? Recommendation? I've been looking for the CTS-V caps which are supposed to be metal, not plastic. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX