06-11-2014 | #1 |
Join Date: Mar 2008
Location: Auburn, KY
Posts: 554
|
Cruise control inop
When I got my Ruby Red Z last April, I discovered that the cruise control did not work. At the time, I thought it was an easy fix, just check the hoses. I took it down to Gordon for him to take a look at it. He checked the vacuum and it was good. Check the dump switch and it worked fine. Switched out the stem with my other ZR-1 and that didn't do it. Finally, switched out the cruise control module with one that Gordon had and that didn't do it. I checked the clutch switch and it is clicking like it should which doesn't necessarily mean that it's working but that means that the adjustment is okay. Buying a test light to run through the diagnostics in the service manual. We did find out that someone put a 5 amp fuse in where it should have been a ten. We did find out that the LTPWS module has been fried because it would not enter into diagnostics mode. The cruise and the LTPWS share the same fuse. Looking for suggestions as to what next. No speed sensors codes shown.
__________________
Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary |
|
|