saying hello - ZR-1 Net Registry Forums

Dynomite · 06-10-2014

Make sure you drain just a bit of coolant to get the coolant level below the top of the Injector Housings. I also Plug TB coolant at the top of the Injector Housings making it easy to pull the plenum without messing with coolant the next time you pull the plenum. You also have to block the coolant flow from the TB to the top metal tank in front of the passenger side (I placed a plug in the rubber hose).

Good Luck

Waiting for SD Plates ULNOTWN

06-10-2014	#19
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,807	Re: saying hello Make sure you drain just a bit of coolant to get the coolant level below the top of the Injector Housings. I also Plug TB coolant at the top of the Injector Housings making it easy to pull the plenum without messing with coolant the next time you pull the plenum. You also have to block the coolant flow from the TB to the top metal tank in front of the passenger side (I placed a plug in the rubber hose). Good Luck Waiting for SD Plates ULNOTWN __________________ Left Clickable links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 06-11-2014 at 12:03 AM.