VETuner

[-=Jeff=-]

I will answer these the best I can:

Originally Posted by Schrade

First here, out of curiosity, is the 3-D in the screenshot an LT5? If so, stock Memory & Calibration module?

That Screen shot shows crap data.. don't pay attention to the details of the 3D Img, That was not the intention of the Picture, more to show what it displays

Originally Posted by Schrade

What parameters can be modified with this program? Could for instance, INJ pulsewidth be increased 2%, or 5% perhaps, for between 750 - 950 RPM's, or any other RPM range?

No, all this does is takes the MANUAL work of changing each VE (Volumetric Efficiency) Cell on the VE tables.. nothing more nothing less, I can vary the targeted BLM for VE. it then replaces the VE values in the BIN file

Originally Posted by Schrade

If it DOES allow something like this, can the values changed by 'click and drag', in the 3-D graph?

I might look into the click an drag on the 3D graph but for now it does not do that

Originally Posted by mike100

Yes please.

Is there real time data function? I'm chasing a small lean hesitation on a roll right now that I just patched with a little PE trim. That was not my first choice on how to fix that. I can kind of guess the Kpa with scanning, but that looks handy.

not this is not realtime


The original purpose of this program was to help tune the part throttle/closed loop VE tables on my 89 Corvette when I converted it to a MAP System.

The way it works is you use your choice of datalogger, go and drive your car and record the data. then get the BIN file from the current PROM, configure this program for your datalogger, and load you datalogger file and BIN file.

The program then searches the datalog extracts info, averages the BLM info, adjusts the proper cell and then will create a new BIN for you to burn in your MEMCAL and try again. Instead of taking hours to fine tune the VE tables this moves much faster

I then added functionality for the LT5 bin, the picture here has stuff even Dominic has not seen or tested yet. I will get this version to him and work to add more function to it.. Dom had a few suggestions for this I don't have implemented. I do this program when time allows so progress is quite slow