ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > Off Topic > Review/Evaluation

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-09-2014   #1
Bearly Flying
 
Join Date: Dec 2012
Location: Ponoka, Alberta, Canada
Posts: 158
Default Lift King 9000

I just had a Lift King 9000 lb 4 post lift installed in the garage.



Initial impressions are good. Columns are nice and heavy, with 10 different lock heights. The top position has a set of pins that can be installed as a secondary safety.

It comes complete with castors that pin on for moving the lift, a heavy duty jack tray rated for the full capacity of the lift, 3 drip trays and a tarp that can be attached underneath the runways to further protect the lower car.

The only modification I had to do was the front safety stops were too high and the Air Dam wouldn't clear. I redrilled 2 holes on each plate and lowered them by 2 inches. Another nice feature is when you take the approach ramps off, there is a set of Safety Stops that drop into the socket where the ramps attach.

Luckily I have 10 ft ceilings in the Garage and can utilize the full height of the lift. it is 74 inches to the top of the runways in full up position.

With 3 cars, 2 motorcycles and a herd of RC Aircraft Shop space was getting crowded.
__________________
91 ZR-1 Arctic White/Gray
01 C-5 Magnetic Red/Black
85 FJ 1100 (Big Bore kit, Hooligan Bike)
05 FJR 1300 Yamaha (Long Distance, Sport Touring)
And a whole whack of RC Planes
Bearly Flying is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020