Rear Z06 Caliper Install

[secondchance]

Originally Posted by USAZR1

Dom & Yun: I'll be installing 19" CCW's probably next week so I can certainly understand the motivation to add big brakes. This thread has just added fuel to the fire.

On the front of our 94,the two options I'm considering are the complete C6 Z06 set-up or just install a pair of Baer 6P's on its front Eradispeeds. Cost would be about the same but the Baer calipers would be a much simpler mod.
However,the 14" Z06 rotors are hard to ignore.

I fully understand. To be frank, my first thought was Brembos. I backed off because Brembos are quite expensive. However, Brembos are getting quite prevalent with OEM - Camaroes, Mopars and even Hyumdai Genisis Coupes.Perhaps, there is a market for adapter plate for Brembos to C4.
I think, after installing 19" CCWs, you are going to look through the wheels and go "I need to fill them in". When you do, figure which brakes and then start looking for engineering solutions.
Once I am done with 380 build, I am going to finish the fronts with 6 pot Wilwood w/ 2 piece rotors and replace rear with 2 piece rotors also. To optimize 18 or 19" wheels performance wise and aesthetically is 14" rotors up front and 13" rotors for the rear.