![]() |
#1 |
![]() Join Date: Nov 2011
Location: Saskatoon Canada
Posts: 47
|
![]()
Finished my first plenum pull today. Was having intermittent no crank problems so I thought I would pull the starter and check the solenoid. Sure enough the contacts were pretty bad so I put a solenoid kit in and cleaned and checked everything else while I was in there. All the brittle vacuum lines kind of scared me as a couple snapped off and I was hoping that I was able to remember where they all went. After reading all the posts with guys having more problems after the pull than before I was crossing my fingers as I turned the key. It fired right up and no codes so it looks like it went back together right. Still too much snow on the ground to take it for a drive. Gives me a chance to do a few more things yet.
__________________
1991 ZR-1 #1158 Dark Red Metallic/Saddle 1993 LT-1 White/Red Guts SOLD 1986 L98 4+3 Red/Grey SOLD |
![]() |
![]() |
|
|