wheel refinishing?

[-=Jeff=-]

Originally Posted by USAFPILOT

jeff where did you get those center caps? do they just plug in?

No they don't although that was my original hope.. it is an easy mod to do..

The Center caps are OEM GM HHR/Cobalt 2.25" Center caps

http://www.ebay.com/itm/MONTE-CARLO-...117113&vxp=mtr

I removed the tang on the back side of the OEM caps as the clip diameter is too small..

I then removed the mounting ring from the Shelby cap (just taped). I then used 3M Acrylic body molding tape and put the Shelby mounting ring on the OEM cap and got what you see there in the pic.

Shelby Cap


Compared