![]() |
#1 |
Join Date: Dec 2012
Location: Ooltewah,Tn
Posts: 22
|
![]()
Hi
Today i installed the rear lowering bolts with bushings from Mid America,on my 91 ZR1, the job was not too bad just have a couple of questions for the forum members, what is the stock height at the rear of the car from the ground to middle of the fender, after replacing the stock bolts the pass side measures 27 3/4 inches and the drivers side 27 1/4 inches I have played with the the right nut where it has 3 threads left to the bottom of the bolt the left side has about 4 threads left to the bottom of the bolt, I hear there is some settling that occurs with time, should I align it know or drive it some more,also is half an inch difference between the left and right a big deal, what can I do to correct it? thanks for your help. ![]() ![]() |
![]() |
![]() |
|
|