A/O Engineering Forced Air Filler Plate - ZR-1 Net Registry Forums

Blue Flame Restorations · 10-30-2012

I took the center cross piece to the mold maker today. I'll need a urethane mold made for this piece. It was injection molded originally.

He is making this mold with the remaining rear bumper molding molds.

I'll have front filler plates available soon.

Molds and Parts to make in December are as follows.....

* A/O Engineering Forced Air Plates DONE (waiting on center cross insert mold)
* 49th Street Rockers NEXT
* Callaway ZR-1 panels (for my personal ZR-1 needs ONLY - Modifying the kit for my own design)
* 1954 Motorama Fastback roof/trunk/door molds ALMOST DONE

February 2013 will be a nasty, messy month.....my shop will never be the same.

Guys, I admit that I'm slow with this stuff. This is not my area of concentration. This is extra side work for me but I do enjoy providing the parts.

10-30-2012	#1
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	A/O Engineering Forced Air Filler Plate I took the center cross piece to the mold maker today. I'll need a urethane mold made for this piece. It was injection molded originally. He is making this mold with the remaining rear bumper molding molds. I'll have front filler plates available soon. Molds and Parts to make in December are as follows..... * A/O Engineering Forced Air Plates DONE (waiting on center cross insert mold) * 49th Street Rockers NEXT * Callaway ZR-1 panels (for my personal ZR-1 needs ONLY - Modifying the kit for my own design) * 1954 Motorama Fastback roof/trunk/door molds ALMOST DONE February 2013 will be a nasty, messy month.....my shop will never be the same. Guys, I admit that I'm slow with this stuff. This is not my area of concentration. This is extra side work for me but I do enjoy providing the parts. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 02-12-2013 at 07:27 PM.