After plenum pull.... - ZR-1 Net Registry Forums

Daniel_Mc · 04-28-2012

I have pulled the plenum, IH's, rebuilt the TB, and pulled the cam covers. The Z started right up idles fine and drove good until you hit 3K rpm then it feels like you are hitting the rev limiter? I pulled the plenum back off thinking I didn't plug something in but it's all plugged in. Also it is throwing code #56 - Vacum sensor circuit? So what am I missing or what did I goof up?

Thanks,

Daniel

04-28-2012	#1
Daniel_Mc Join Date: Jan 2007 Location: Pineville, LA Posts: 584	After plenum pull.... I have pulled the plenum, IH's, rebuilt the TB, and pulled the cam covers. The Z started right up idles fine and drove good until you hit 3K rpm then it feels like you are hitting the rev limiter? I pulled the plenum back off thinking I didn't plug something in but it's all plugged in. Also it is throwing code #56 - Vacum sensor circuit? So what am I missing or what did I goof up? Thanks, Daniel