Aluminum Pulleys & Stuff - ZR-1 Net Registry Forums

Pete · 02-28-2012

Ok boys.

About 3 years ago i made aluminum pulleys.
I have power sterring,water pump.

I can get water pump 10% underdrive.

Power steering $189
Water Pump $169
Water Pump UD $199

160 Thermostats $79

I also have tailhousings to install 4L80E trans in a C4 $649

I can also regrind cams (need to provide stock cams) $1495
Cam specs:
Set One.
.236 .425 Intake
.220 .425 Exhaust
Set Two.
.240 .440 Intake
.224 .420 Exhaust
Set Two cams are in 2 big inch LT5's and run 10's @ 134mph
These 2 cars drive and run like stock Z's

I also have Elecric Water Pump set up if any one is interested.
I can also rebuild stock clutch pressure plates $225

Just thought i'd put this out there.

All my stuff is made in the USA.

Pete

02-28-2012	#1
Pete Join Date: Dec 2003 Location: Chicagoland,IL Posts: 2,679	Aluminum Pulleys & Stuff Ok boys. About 3 years ago i made aluminum pulleys. I have power sterring,water pump. I can get water pump 10% underdrive. Power steering $189 Water Pump $169 Water Pump UD $199 160 Thermostats $79 I also have tailhousings to install 4L80E trans in a C4 $649 I can also regrind cams (need to provide stock cams) $1495 Cam specs: Set One. .236 .425 Intake .220 .425 Exhaust Set Two. .240 .440 Intake .224 .420 Exhaust Set Two cams are in 2 big inch LT5's and run 10's @ 134mph These 2 cars drive and run like stock Z's I also have Elecric Water Pump set up if any one is interested. I can also rebuild stock clutch pressure plates $225 Just thought i'd put this out there. All my stuff is made in the USA. Pete __________________ '91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage