HELLLLLPPPPPP ME LT5 Brothers!!! - ZR-1 Net Registry Forums

mike100 · 10-09-2011

Mine was the purge line that goes between the purge solenoid and the throttle body. Its that hard plastic line with the 4" diameter curly-Q bend in it under the plenum (of course, where else would it be- everything is in there).

maybe backfires help those things slip out. I rough sanded mine to help keep in in the rubber connection better. It would never idle below 1400 except when cold.

the book over the throttle inlet verified this as it could still run on just the air leak. spraying some carb cleaner in the middle of the runners on the drivers side resulted in an idle speed change which verified that for me.

10-09-2011	#11
mike100 Join Date: Feb 2011 Location: San Marcos CA Posts: 1,786	Re: HELLLLLPPPPPP ME LT5 Brothers!!! Mine was the purge line that goes between the purge solenoid and the throttle body. Its that hard plastic line with the 4" diameter curly-Q bend in it under the plenum (of course, where else would it be- everything is in there). maybe backfires help those things slip out. I rough sanded mine to help keep in in the rubber connection better. It would never idle below 1400 except when cold. the book over the throttle inlet verified this as it could still run on just the air leak. spraying some carb cleaner in the middle of the runners on the drivers side resulted in an idle speed change which verified that for me.