|
09-16-2011
|
#15 |
|
Join Date: Feb 2008
Location: Vancouver, BC
Posts: 252
|
Re: Breather Mold Project
I've been chasing a high/unstable idle issue for awhile and tonight think I hay have found part of my issue. The connection of the vacuum pipe to the Breather Mold.
The pipe has a lip on it, mine was not pushed into the mold and I believe was intermittently leaking. It would be great if the mold had a female thread to accept the lip on the vacuum tube and hold it firmly in place - is that a possibility? See attached (not fully inserted into mold) Glenn
__________________
[SIGPIC][/SIGPIC] __________________ 1990 Corvette ZR-1 #2824 4.10's, Custom PROM, Flowmaster, Top End Port NCRS BC Chapter |
|
|
|
|
Threaded Mode