Motor mount swap questions - ZR-1 Net Registry Forums

VetteMed · 06-21-2011

I don't think too many folks have changed motor mounts on their Zs, but I have been wondering if the lack of clearance between the #1 header tube and the steering shaft is due to sagging mounts, being that my car has a lot of miles on it. Now, I should have changed the mounts when the headers were off, but I didn't -- so now I'm left with wondering if I'm going to need to pull the headers off in order to change out the mounts or not. Does anyone know if it's doable with the headers (Jeal) in place?

Edit:
It's not doable. Pulling the headers is really not that bad of a job, and it gave the access needed to do this job properly. See later in thread for pics of mounts and more commentary.

06-21-2011	#1
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,828	Motor mount swap questions I don't think too many folks have changed motor mounts on their Zs, but I have been wondering if the lack of clearance between the #1 header tube and the steering shaft is due to sagging mounts, being that my car has a lot of miles on it. Now, I should have changed the mounts when the headers were off, but I didn't -- so now I'm left with wondering if I'm going to need to pull the headers off in order to change out the mounts or not. Does anyone know if it's doable with the headers (Jeal) in place? Edit: It's not doable. Pulling the headers is really not that bad of a job, and it gave the access needed to do this job properly. See later in thread for pics of mounts and more commentary. __________________ 2004 Z06/Z16 LeMans Commemorative Edition 1991 ZR-1 #302 White/Gray (sold) 1991 ZR-1 #1147 Red/Saddle (sold) Last edited by VetteMed; 06-23-2011 at 09:15 PM.