Avic install - ZR-1 Net Registry Forums

Rex Ruby · 06-15-2011

Not a ZR1 install but all C4's are the same inside!
I was thinking about upgrading the stereo in my 1993 but I’m a complete novice when it comes to audio. As I did my research and ultimately the installation I took the following pictures and write up to document the process. Hope it helps someone! I had put up a post or two asking some audio questions, did a fair amount of reading and called on some members the vette community that I knew had audio knowledge. This research got me to a basic understanding of what I wanted to accomplish. In putting my questions out there a forum member offered me an Avic D3 for free. Thanks TIM!

So I have a nice head unit, I decided to do 6X9 3 way speakers up front and 2 8” subs in the back. From looking at pictures of other C4 installations using 5.5” speakers, researching measurements of some 6X9s and taking apart the front speaker area to take measurements I felt I could make that work. Also my thoughts were the 3 way would give me mid and tweeter. I used the Rockford Forsgate RF R1693. Others had done 8” subs but I still checked the rear areas to make the 8” JBL GTO804 subs fit. I came across a free Alpine MRV100M for the subs. I used a Rockford Forsgate Prime R 150-2 to power the 6X9s.

Here’s the start, always disconnect the battery!

Original console area, I had an XM set up and a 12 disc CD changers both connected via FM modulators.

Original right side front Bose speaker.

Original left side front Bose speaker.

Original Bose right side rear speaker.

Original Bose left side rear speaker and 12 disc changer.

06-15-2011	#1
Rex Ruby Join Date: Feb 2005 Location: Springfield, PA Posts: 372	Avic install Not a ZR1 install but all C4's are the same inside! I was thinking about upgrading the stereo in my 1993 but I’m a complete novice when it comes to audio. As I did my research and ultimately the installation I took the following pictures and write up to document the process. Hope it helps someone! I had put up a post or two asking some audio questions, did a fair amount of reading and called on some members the vette community that I knew had audio knowledge. This research got me to a basic understanding of what I wanted to accomplish. In putting my questions out there a forum member offered me an Avic D3 for free. Thanks TIM! So I have a nice head unit, I decided to do 6X9 3 way speakers up front and 2 8” subs in the back. From looking at pictures of other C4 installations using 5.5” speakers, researching measurements of some 6X9s and taking apart the front speaker area to take measurements I felt I could make that work. Also my thoughts were the 3 way would give me mid and tweeter. I used the Rockford Forsgate RF R1693. Others had done 8” subs but I still checked the rear areas to make the 8” JBL GTO804 subs fit. I came across a free Alpine MRV100M for the subs. I used a Rockford Forsgate Prime R 150-2 to power the 6X9s. Here’s the start, always disconnect the battery! Original console area, I had an XM set up and a 12 disc CD changers both connected via FM modulators. Original right side front Bose speaker. Original left side front Bose speaker. Original Bose right side rear speaker. Original Bose left side rear speaker and 12 disc changer. Last edited by Rex Ruby; 06-15-2011 at 01:08 AM.