Plenum Pull...Parts List Varification...

[tomtom72]

Originally Posted by | 1990 ZR-1 |

Mike and Tom,

Thanks for your help guys. I'm going to order the injectors and gaskets, and hopefully be done with these issues by this weekend. (Wishfull thinking). I'll post up the results.

That's what this Bortherhood is all about. We try to help each other keep our cars in good order!

If you have any issues as you do your work don't forget to post up. Believe it or not this is a right of passage when you own an early, pre-92, ZR-1. Take your time and be patient as there is a lot of busy work under the plenum. Also, this bears repeating, check to see the bolts on the CCVBox Cover are tight as they create quite the oil mess. Check the T/Q on the I/H bolts and pull the starter to make certain the drain is clear & flowing. A camera could be useful for the wiring & vacuum line routing on the buttoning up phase....I didn't have a digital at the time I did mine and I had to take notes!

If you like I can PM you my cell number as a just in case situation. As I think I'm close but I believe there are some Z-Brothers closer.


Tom