Productive week... - ZR-1 Net Registry Forums

Toyvet1 · 01-18-2011

Have had a good couple weekends. I was able to lower the front end with the wedge kit.Rear will be done in the future. Cut the rotors and installed Hawk pads, cleaned the suspension.

I have a vacuum leak somewhere and I have oil leak at the breather cover. So Im replacing the breather gaskets . the IH gaskets and resealing everthing . What a mess under there.

-=jeff=- was a big help getting the new Dymags to the stripper so they can be powdercoated. Next up is figuring out if Im going GY or Kuhmo's.

Then the last project is a set of seats out of a newer model....

Then I can start on the 79......

01-18-2011	#1
Toyvet1 Join Date: Dec 2007 Location: Bloomingdale, Il Posts: 330	Productive week... Have had a good couple weekends. I was able to lower the front end with the wedge kit.Rear will be done in the future. Cut the rotors and installed Hawk pads, cleaned the suspension. I have a vacuum leak somewhere and I have oil leak at the breather cover. So Im replacing the breather gaskets . the IH gaskets and resealing everthing . What a mess under there. -=jeff=- was a big help getting the new Dymags to the stripper so they can be powdercoated. Next up is figuring out if Im going GY or Kuhmo's. Then the last project is a set of seats out of a newer model.... Then I can start on the 79......