LT5 Head Gaskets

[A26B]

Jerrys Gaskets Head Gasket Testing is Sucessfully Completed

Testing was performed on a stock, 90 model, 375Hp engine over a two day period.

I have placed an initial stock order for 50 LH and 50 RH head gaskets, which should be available for immediate shipment on Oct 7th.

J/G head gaskets can be purchased individually but should not be installed in conjunction with any other type of head gasket as differences in compressed thickness will result in un-equal compression between cylinder banks.

Pricing is $79.75 per gasket. Gaskets are individually packaged.

A technical data sheet and installation guide is being prepared and can be viewed on the J/G website when the gaskets are in stock for sale.

Thanks to everyone and all of your support. Without you, J/G would not have been able to develop the head gaskets, as well as several other new parts that are in critical short supply or no longer available.

J/G has also developed and ordered into production, Cam Sprocket bolts and Valve Spring Seats. Both items are improvements on the OEM part, made from higher strength alloy steel.

Cam Sprocket bolts were specially made to duplicate the OEM design with a tall, 6pt hex drive to better facilitate torque-angle tightening during the cam timing procedure. Availability is expected around Nov 25th.