|
08-23-2010
|
#11 |
|
Join Date: Apr 2009
Location: Prather, CA
Posts: 809
|
Update...
Started working on my Z again, still working on the interior.
Got both carpeted door sill/front speaker covers cleaned and installed. I also cleaned the seat belts and detailed the plastic pieces. I filled the sink with water then dumped in a good amount of concentrated Simple Green (I've got a big, plastic sink in the garage, very handy). I let the belts soak in this mixture for a good 20 minutes (after pulling the belt out all the way and jamming it with a screw driver so it would stay out). I then scrubbed the full length of each belt on both sides with a plastic scrub brush.   Both side cargo carpet pieces cleaned and installed.  
__________________
[IMG]http://i13.photobucket.com/albums/a292/bdw18_123/_zr1netforumsigphoto.jpg[/IMG][B] 1990 Corvette ZR-1 [/B][I] White/Flame Red, #2299, mostly stock, 144K miles.[/I] -Cams timed to the '93-'95 405HP LT5 stock timing. -IAT sensor relocated to below front bumper. -Haibeck hoops installed in airduct. -OBX cat-back exhaust. [COLOR=DarkRed][B](SOLD - December 2012 [/B][/COLOR][COLOR=DarkRed][B]:hello:)[/B][/COLOR] 1993 Corvette Coupe Black/Black, 6-speed (SOLD - October 2009 :hello:) |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode