Rear hatch weatherstrip.

[pantera1683]

Originally Posted by zr1nsxgto

I think I need to get in contact with a applications specialist at 3M and see what is the best product for gluing the corners. I can make a fixture that would accurately mitre cut a 1/16 or so off of each cut to get into virgin material. Then hold the strip in the fixture to apply and hold the glue while it cures. I'm fairly certain that 3M developed the adhesive that was originally used and they probably have developed a superior product since then.

I used to work in a speaker manufacturing plant and we used a variety of adhesives for a gazillion applications. One of those applications was gluing the rubber surround of a woofer to the paper cone. This was done with a product that was referred to as "black max" and stayed pliable for the life of the product. These cones were subjected to a battery of environmental stress testing---salt spray, UV resistance, heat-cold survival, etc. I think that product might work well for the weather strip. Accurately cutting and regluing is what will determine how well it works.

Sounds cool, keep us updated.