Can I live with these injectors till Fall?

[gbmidyear66]

Well, I suspected my injectors were on their way out.

When the engine gets hot - say stuck in stop and go traffic for an hour - I can hear the flywheel chattering, although the engine isn't noticeably stumbling and doesn't stall ( I have also had an SES code for lean mixture). So I meaured the resistance of my primary injectors today, about an hour after a short 20 min run with the car. Resisatance values I get are:

Cyl 1 = 9.1
Cyl 2 = 12.9
Cyl 3 = 9.3
Cyl 4 = 12.9
Cyl 5 = 13
Cyl 6 = 5.8
Cyl 7 = 12.8
Cyl 8 = 12.6

I just ordered the Haibeck DVD, and would really like to avoid tackling a Plenum pull until the fall. Any reason I can't put this job off till then?

I was planning on going with the Accel product - price is atractive and I am not aware of any downside. ANy reason to consider another product?