ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-03-2010   #18
tpepmeie
 
Join Date: Aug 2005
Location: Fishers, IN
Posts: 815
Default Re: intake port molds

Quote:
Originally Posted by Paul Workman View Post
It would be very interesting to see some dyno curves with your IHs and then with some slightly bigger (like mine). I'd be willing to lend my IHs/plenum to ya to do just that, but there would be the transition between my 36.xs to your heads' 35s to figure out (epoxy?).
That wouldn't work. My heads are neither 35mm, nor round, at that interface. We're not going to get crazy on the housings csa, but we will knock the injector boss way down, and enlarge the entry. Kevin's mono runner is a cool looking piece, and flows very well, but I'm not going that far.

Quote:
Originally Posted by Paul Workman View Post
As for the "Big Dogs" not flowing as well as Todd's, (assuming all else being equal in the test) there's got to be some turbulence being developed in their design that is creating some kind of standing wave(s) - effectively pinching off the air flow...would be my guess.
I think it has more to do with my valves, chamber, and short side radius, rather than any particular turbulence in Kevin's port. His heads flow very well.

Todd
tpepmeie is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:16 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020