It's coming together.

[rhipsher]

Much quicker than I thought it would. Thursday night after work got the cam covers on. Friday night got most of the secondary plumbing hooked back up and injector housings accept for breather box hoses. I shop vacuumed out the head ports just in case there might be anything down in there. I'm not taking any chances. I used course ss wool to stuff into the pcv area. But a 50 ml tube of loctite 518 was more than enough to do the job. Just lay a bead and spread evenly with your fingers. I've still got to do some clean up around the breather box in the front of the car.
[IMG]http://i301.photobucket.com/albums/nn63/keeno1970/valvecover.jpg[/IMG

]





About two years ago this idiot in the Corvette club made a comment about my engine not being all that clean which really offended me and he knew it by the look on my face. I told him well of course it's not going to be as clean as your 2007. Now he can stick it where the sun don't shine.
This is what it looked like before which wasn't bad for 19 years old.