Quick Q: Clutches... - ZR-1 Net Registry Forums

Paul Workman · 09-13-2009

IF I need to do anything about my clutch, NOW would be the time!

1) (Pardon me Pete), I don't remember the new and the "go, no-go" thickness of the (stock) clutch disc. If someone has those measurements, and mine is more than halfway to the good side, I'll forego further expen$e for now and reinstall what I have.

2) Other than the racket resulting from a single mass FW, is there anything I should know about if I attempt to reinstall my existing (used but good?) disc and pressure plate to a new (Fidanza?) FW? What about balancing the whole works and where in the Chi-town area would someone be able to do the balancing if necessary?

3) I heard that AutoZone is a good source for clutch (pressure plate, disc, & TO bearing) replacements for our Zs, no?

Thanks in advance!

P.

09-13-2009	#1
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Quick Q: Clutches... IF I need to do anything about my clutch, NOW would be the time! 1) (Pardon me Pete), I don't remember the new and the "go, no-go" thickness of the (stock) clutch disc. If someone has those measurements, and mine is more than halfway to the good side, I'll forego further expen$e for now and reinstall what I have. 2) Other than the racket resulting from a single mass FW, is there anything I should know about if I attempt to reinstall my existing (used but good?) disc and pressure plate to a new (Fidanza?) FW? What about balancing the whole works and where in the Chi-town area would someone be able to do the balancing if necessary? 3) I heard that AutoZone is a good source for clutch (pressure plate, disc, & TO bearing) replacements for our Zs, no? Thanks in advance! P. __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode