bad stutter at 2000 rpm, only power key on - ZR-1 Net Registry Forums

Spanky1965 · 09-03-2009

Picture 1 shows how the pin tool can be slipped through the weather pack seal and into contact with the connector pin. Note that the seal is not pierced by the pin. The pin is slipped between the soft sealing ring and the wire. Pin C17 is on the green ECM connector. The wire is pink on ’90 LT5’s and pink with a black stripe on ’91 – ‘95’

should have read this first...LOL

09-03-2009	#11
Spanky1965 Join Date: Jul 2009 Location: Springfield Missouri Posts: 53	Re: bad stutter at 2000 rpm, only power key on Picture 1 shows how the pin tool can be slipped through the weather pack seal and into contact with the connector pin. Note that the seal is not pierced by the pin. The pin is slipped between the soft sealing ring and the wire. Pin C17 is on the green ECM connector. The wire is pink on ’90 LT5’s and pink with a black stripe on ’91 – ‘95’ should have read this first...LOL

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode