Selective Ride Control Gears - ZR-1 Net Registry Forums

tf95ZR1 · 12-23-2005

In attempting to look into and repair a "clunking" front shock due to a loose
locking nut, I removed the actuator to find ( or maybe I caused) a broken plastic gear. The manual calls it a "selective gear" that goes on top of the shock shaft. I didn't want to buy an entire shock, so I looked for the gear. Can't buy just the gear from GM. A new shock costs just about as much as a Z06.
I found a guy, Brian, here in So. Cal. who sells these gears as machined metal in sets of (4) that includes new pins and a center punch-like tool. Not cheap, about $200 for all if I remember correctly. They fit, and my warning light doesn't go on any more. If you need them:

Geraci4HP@aol.com

Good luck,
Ted

12-23-2005	#1
tf95ZR1 Join Date: Aug 2005 Location: Northridge, CA Posts: 1,457	Selective Ride Control Gears In attempting to look into and repair a "clunking" front shock due to a loose locking nut, I removed the actuator to find ( or maybe I caused) a broken plastic gear. The manual calls it a "selective gear" that goes on top of the shock shaft. I didn't want to buy an entire shock, so I looked for the gear. Can't buy just the gear from GM. A new shock costs just about as much as a Z06. I found a guy, Brian, here in So. Cal. who sells these gears as machined metal in sets of (4) that includes new pins and a center punch-like tool. Not cheap, about $200 for all if I remember correctly. They fit, and my warning light doesn't go on any more. If you need them: Geraci4HP@aol.com Good luck, Ted

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode