05-24-2009 | #26 |
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
|
Re: Injector machining done.
NP! As far as the surface finish goes a 32 finish is an excellent finish. My plan was to tap it for a 10-32 or 1/4-20 and screw a small eye bolt into it for the chain. But you can screw whatever you like into it as long as it's the same thread pitch.
Last edited by rhipsher; 05-24-2009 at 02:24 PM. |
Thread Tools | |
Display Modes | |
|
|