Hans; German Engineering at its best! - ZR-1 Net Registry Forums

LGAFF · 09-03-2008

Well, for months I have had 390+rwhp, great looking 21K mile car, with the exception of some pretty crooked *** exhaust tips.

A year ago I had an X-Pipe put on, during the reinstall they could not get the pipes on straight(they have always been somewhat crooked). I was in a hurry and had to leave with some seriously messed up tips. On three seperate ocassions I have spent about 2-3hrs pushing pulling, etc on the tips. A few weeks ago Hans(CCMANO) mentioned that the rubber hangers might be switched.....sure as **** once I reversed them the muffler position improved about 100%, so if you are struggling with setting up the tips and they seem to keep tipping up every time you tighten them, flip the exhaust hangers around...problemo solved!

Thanks Hans!

09-03-2008	#1
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Hans; German Engineering at its best! Well, for months I have had 390+rwhp, great looking 21K mile car, with the exception of some pretty crooked * exhaust tips. A year ago I had an X-Pipe put on, during the reinstall they could not get the pipes on straight(they have always been somewhat crooked). I was in a hurry and had to leave with some seriously messed up tips. On three seperate ocassions I have spent about 2-3hrs pushing pulling, etc on the tips. A few weeks ago Hans(CCMANO) mentioned that the rubber hangers might be switched.....sure as ** once I reversed them the muffler position improved about 100%, so if you are struggling with setting up the tips and they seem to keep tipping up every time you tighten them, flip the exhaust hangers around...problemo solved! Thanks Hans!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode