Maryland Emissions Test Results - ZR-1 Net Registry Forums

HIZNHRZ · 07-15-2008

Here's a data point that might be of interest to some. I took my Z for Maryland Emissions Certification today. The results were as follows:

Hydrocarbons (HC) Carbon Monoxide (CO)
MD State Standard: 220 PPM 1.20 PCT
Inspection Reading: 121 PPM .00 PCT

My car has new injectors, stock thermostat, wires and coil packs; Watson headers (with stock air pump and tubes intack), RT bullet cats, Corsa exhaust, Marc Haibeck's top end package, and a dyno tune. I also kept my stock dual mass flywheel.

The car makes 420rwhp and 370 ftlbs of torque at 5200 RPM.

07-15-2008	#1
HIZNHRZ Join Date: Apr 2004 Location: Germantown, MD Posts: 732	Maryland Emissions Test Results Here's a data point that might be of interest to some. I took my Z for Maryland Emissions Certification today. The results were as follows: Hydrocarbons (HC) Carbon Monoxide (CO) MD State Standard: 220 PPM 1.20 PCT Inspection Reading: 121 PPM .00 PCT My car has new injectors, stock thermostat, wires and coil packs; Watson headers (with stock air pump and tubes intack), RT bullet cats, Corsa exhaust, Marc Haibeck's top end package, and a dyno tune. I also kept my stock dual mass flywheel. The car makes 420rwhp and 370 ftlbs of torque at 5200 RPM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode