Stainless Works headers

Was working on installing a set of headers and came across a not so small issue.

Be warned the pictures are large.

http://www.pnwzr1.com/images/SSW_Headers/IMG_1253.jpg
http://www.pnwzr1.com/images/SSW_Headers/IMG_1254.jpg
http://www.pnwzr1.com/images/SSW_Headers/IMG_1255.jpg

Shot 1253 shows the interference with the steering rack and also the gap
at the end with the flange and the cylinder head end.

Shot 1254 shows the center stud and that the header can not move any
further back from that point, and also the amount of bolts I was able to
get on to help center the header.

Shot 1255 shows the driver side rear bolt holes and how the line up with
the cylinder head.
Currently the headers are on there way back to SSW. They agree there is a issue, and need to figure out why as the flanges are cut on a CNC machine and the headers are assembled on a jig.