Software to change speedometer signal - ZR-1 Net Registry Forums

becktom · 02-23-2008

Does anybody has a software or know how to change the original set-up of the signal which runs from the transmission to the ECM/CCM?
As I've changed my rear end to another ratio, I'll need to modify my present system for correct MPH reading.
I know there are some additional convertors/gear sets on the market, but I would prefer to alter the existing software if possible.
If somebody might have an idea, would be great!

Thanks

Thomas

02-23-2008	#1
becktom Join Date: Aug 2007 Location: Germany Posts: 6	Software to change speedometer signal Does anybody has a software or know how to change the original set-up of the signal which runs from the transmission to the ECM/CCM? As I've changed my rear end to another ratio, I'll need to modify my present system for correct MPH reading. I know there are some additional convertors/gear sets on the market, but I would prefer to alter the existing software if possible. If somebody might have an idea, would be great! Thanks Thomas

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode