Starter Solenoid Connector - ZR-1 Net Registry Forums

Dynomite · 01-06-2021

I am looking for a couple Starter Solenoid Connectors just in case anyone has a non-repairable Starter.
I have a couple of broken Starter Solenoid Connectors.

The Solenoid Connector can be disconnecting from the copper connector with a solder iron as shown.
The Solenoid Connector can then be tapped out using a flat screwdriver and hammer from inside.

The connector shown in first photo below was removed incorrectly by prying on the outside breaking
the plastic part inserted into the hole "so the tab that was soldered is not showing in first photo below".

01-06-2021	#1
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,797	Starter Solenoid Connector I am looking for a couple Starter Solenoid Connectors just in case anyone has a non-repairable Starter. I have a couple of broken Starter Solenoid Connectors. The Solenoid Connector can be disconnecting from the copper connector with a solder iron as shown. The Solenoid Connector can then be tapped out using a flat screwdriver and hammer from inside. The connector shown in first photo below was removed incorrectly by prying on the outside breaking the plastic part inserted into the hole "so the tab that was soldered is not showing in first photo below". __________________ Left Clickable links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 01-06-2021 at 09:59 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode