putting throttle body back together and return spring seems weak and doesn't snap ba - ZR-1 Net Registry Forums

Corvette95 · 05-17-2020

Putting my throttle body back together, the main shaft return springs seems to be weak so I wrapped the spring one more time, it was very tight, then the one of the pieces of wire on the springs wouldn't let the main shaft seat all the way, I took a small "j" hook and remove the spring from the catch, it seems to be better now on to the butterflies, there is no DAG on them nor was there before I took them out. The butterflies do go in and seat at an angle correct?

05-17-2020	#1
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,118	Help with throttle body reassembly... Putting my throttle body back together, the main shaft return springs seems to be weak so I wrapped the spring one more time, it was very tight, then the one of the pieces of wire on the springs wouldn't let the main shaft seat all the way, I took a small "j" hook and remove the spring from the catch, it seems to be better now on to the butterflies, there is no DAG on them nor was there before I took them out. The butterflies do go in and seat at an angle correct? __________________ Corvette95 Registry and Forum (************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 Last edited by Corvette95; 05-17-2020 at 12:30 PM.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode