MEMCAL card - ZR-1 Net Registry Forums

Hib Halverson · 09-24-2019

Unbolt the FPR and its bracket and move it out of the way.

Feel for the 1/4 hex head bolt which holds the connector to the DIS module. Unscrew that bolt then unplug the harness.

You'll need a aerosol can of contact cleaner which has one of those plastic straws. Spray into the connector on the end of the harness. Then spray into the connector on the back of the DIS module.

Reconnect the harness and tighten the bolt.

Then, road test.

09-24-2019	#11
Hib Halverson Join Date: Jun 2005 Location: CenCoast California Posts: 899	Re: MEMCAL card Unbolt the FPR and its bracket and move it out of the way. Feel for the 1/4 hex head bolt which holds the connector to the DIS module. Unscrew that bolt then unplug the harness. You'll need a aerosol can of contact cleaner which has one of those plastic straws. Spray into the connector on the end of the harness. Then spray into the connector on the back of the DIS module. Reconnect the harness and tighten the bolt. Then, road test. __________________ Hib Halverson Technical Writer former owner 95 VIN 0140 current owner 19 VIN 1878

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode