Pulled plenum...lots a ??'s

[Pete]

Originally Posted by 32valvZ

Ok, heres what I know from the previous owner. The plug wires were replaced in May (ish) 07 They look really good. Also, a few weeks ago, I checked the injectors with an ohm meter while hot. They all specd out between 13.7 & 14.0 ohms.......should I replace them anyway? The 2 hoses on the breather box are really hard...does that mean replacement?

Were the wires replaced with OE used ones(w/LT5 on them).

Again check the gap on the plugs i had an issue where they were gaped too much with one of those snake formula plugs you know the ones that cost more then there weight in gold and it felt like a misfire like it was putting out the flame acted like a turbo/SG car.
I also had a plug that was loosing compression.
Just a thought and easy checks

Pete