ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-08-2018   #22
Ccmano
 
Ccmano's Avatar
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
Default Re: Fidanza users

Quote:
Originally Posted by Jagdpanzer View Post
Next time you have the transmission out wouldn’t hurt to check the mounting flange bore and face runout with a dial indicator on both the transmission and bell housing.
A while back I was tracking down an unusual whining noise a ZF transmission was making in the lower gear ranges. This particular transmission came out of a wrecked ZR-1 that had 5K miles. Found one of the bolting ears on the main case to be slightly bent that introduced an angular misalignment on the input shaft which caused the input shaft bearing to whine. Machined the ear to correct the angular misalignment solved the whining noise problem.
Interesting thought Phil. Considering both transmissions exhibited the same sound, in your scenario it might be more likely that the bellhousing is off. I will try that next time.
H
__________________
90'ZR-1 #1461 Red/Black
Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold
08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold
05 C6 Z51 Red/Black Sold
90'ZR-1 #1723 Black/Gray Sold but not forgotten
91' Z51 L98 White Vert. My First, you always remember your first. Sold.
Ccmano is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:28 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020