WANTED: Cam position sensor for LT5 - ZR-1 Net Registry Forums

WVZR-1 · 12-20-2017

Until Phil has the sensor and confirms the configuration of the sensor to the cavity the connector is of little concern. I've ID'd the connector shell and supplied Phil with all of the tools needed to evaluate components and eliminate guessing. The terminals and seals need to be selective based upon the wire gauge of the sensor he's considered.

I'd say the project is 'under control'!

Jeff - your sources are valid for parts. I used another but I was buying in bulk when I was purchasing.

12-20-2017	#11
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: WANTED: Cam position sensor for LT5 Until Phil has the sensor and confirms the configuration of the sensor to the cavity the connector is of little concern. I've ID'd the connector shell and supplied Phil with all of the tools needed to evaluate components and eliminate guessing. The terminals and seals need to be selective based upon the wire gauge of the sensor he's considered. I'd say the project is 'under control'! Jeff - your sources are valid for parts. I used another but I was buying in bulk when I was purchasing.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode