A question about Bill Bs beam plates.

[jss06c6]

Originally Posted by Ccmano

Interesting... just checked the instructions included with Bills Beam Plates. No mention of adhesives.
H

Hans,

When I got my trans back from Bill a couple of month ago, he did suggest using 3m Window Weld. You can get it at AutoZone or via web. When I took my C-Beam off to pull the transmission, there was a bit of what appeared to be a gray, hardening adhesive on the mating surfaces of both the tailstock of the transmission and the front of the differential. I elected to center and torque the C-Beam in using the beam plates without using the Window Weld to see if it caused any issues. So far, absolutely no problems. I put mine up on the lift to check and clean underneath, so will keep an eye on the C-Beam to check for any changes.

Steve

Sent from my XT1585 using ZR-1 Net Registry mobile app