Rear View Camera Install

[XfireZ51]

Originally Posted by WVZR-1

Now you've got the connector you need to work with unless you also put your hands on the C209 and it was easier to manipulate.

Were it here I might choose the 8 pin mating for the C209 because it might be easier to unlatch, remove the wire, crimp a new terminal with a pigtail to use for the RVC. The terminals are an easy source for me.

The first image I posted way back isn't in the '92 and earlier FSM because the CDM is right there also and they couldn't image that area as easily under the dash. Get the CDM out of the way and it should be much easier and maybe resemble the later image I posted back there.

Dave,

This blue connector is clearly a 10 cavity connector. I think I can get to this one to repin. Once I unlatch it, the IP side should move freely. I have some pins, not sure which one this is yet.