Finally.....The Correct Size Alternator Pulley

[Roadster]

Originally Posted by Dynomite

On the Box end I took a torch and bent a 90 deg (at the box) and within an inch another 90 deg back.

Thanks, I have some extra 15/16" wrenches, I think I can do that!!!

Originally Posted by WVZR-1

These very early Blue-Point offsets I'd think would do quite well for the chore.

http://alloy-artifacts.org/snapon-bl...-tools-p4.html

Looked up some on ebay, seemed expensive......at least the ones I saw!!!