90 degree adaptor for Fuel Pressure Test Hose

[WVZR-1]

Originally Posted by A26B

You never cease to amaze me with your infinite wealth of knowledge.

Originally Posted by -=Jeff=-

That makes 2 of us

Sorry to disappoint - I should have checked further!!

But I believe that ain't correct for the external thread of the fuel pressure Schrader. I looked further and I do think it's very likely 4AN - if I were looking to fabricate a 90° adapter I'd take the cap and check the cap against a 4AN first. That thread would make it 7/16-20 and an OTC 7430 adapter matches that for thread dimensions. -32 TPI is considered I guess "small Schrader" in fuel pressure language.

This adapter is part of the higher $$ Actron pressure kit

https://actron.com/content/right-ang...hrader-adapter

All of the "higher end" gauge packages will likely use what the OP has mentioned finding.

I used a Cornwell Tool kit to sort "nomenclature"

http://www.cornwelltools.com/webcat/...aster-Kit.html

Originally Posted by Dynomite

I was going to try the AC connectors

Refrigerant/AC is 7/16-20 I believe.