Stuck!! No crank ! LF some input and help !

[5ABI VT]

Originally Posted by Dynomite

The relay mod if you are talking the relay mod I described in a Link.......only requires current to close the main points of the relay after which the main points of the relay pass current from the battery directly to the Field coils of the Starter Solenoid. The magnetic field created within the Solenoid is then maximum with maximum force on the Solenoid points created. The Solenoid points then pass maximum current allowed from battery to Starter motor.

Reconditioning the starter Solenoid involves cleaning/replacing the Solenoid points......and cleaning the plunger itself.



Sent from my iPhone using ZR-1 Net Registry

I believe I understand. Admittedly I am not very experienced with working with wiring diagrams and relays etc. takes me a little to fully comprehend everything in my mind I think

So that relay mod bypasses the vats and clutch switch etc and if the starter works it will fire ? Does that mean it's unnecessary to do the key pellet bypass (not even sure what that is called - I had it happen on my 4th gen fbodys and putting a resistor in the wiring allowed it to start) . Again I appreciate it !