Belt Tensioner Pulley - ZR-1 Net Registry Forums

KPW · 08-15-2016

Old tensioner pulley rattles, tells me that the bearing is on its way out. Bought the L98 Dayco unit to rebuild my LT5 unit.

I noticed that the pulleys (old and new) are really tight fit to the Dayco post, but have a tiny bit of play on the LT5. Otherwise, things seem to be the same. Any thoughts on how I can fill the gap?

08-15-2016	#1
KPW Join Date: Jul 2015 Location: Ypsilanti, MI Posts: 116	Belt Tensioner Pulley Old tensioner pulley rattles, tells me that the bearing is on its way out. Bought the L98 Dayco unit to rebuild my LT5 unit. I noticed that the pulleys (old and new) are really tight fit to the Dayco post, but have a tiny bit of play on the LT5. Otherwise, things seem to be the same. Any thoughts on how I can fill the gap? __________________ 1991 ZR-1 #1438 Black/Black & Red

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode