On pulling front fascia off a 92 - ZR-1 Net Registry Forums

XfireZ51 · 01-31-2016

My front fascia had a defect when I first bought it, w the passenger side corner having cracked paint. I'm in the process of removing fascia and thought I would ask if anyone else has done this. I've removed all the bolts along the fender well, front air dam, top along the hood (what a PITA, especially the two corner TORX screws). I see that there is a center retainer but can seem to see the bolts from behind. Any hints are welcome.

Thx.

01-31-2016	#1
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,709	On pulling front fascia off a 92 My front fascia had a defect when I first bought it, w the passenger side corner having cracked paint. I'm in the process of removing fascia and thought I would ask if anyone else has done this. I've removed all the bolts along the fender well, front air dam, top along the hood (what a PITA, especially the two corner TORX screws). I see that there is a center retainer but can seem to see the bolts from behind. Any hints are welcome. Thx. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode