Jumper to avoid being stranded with a failed Primary Fuel Pump - ZR-1 Net Registry Forums

QB93Z · 05-26-2015

I also had trouble finding the female connector, which is why I cannibalized an old unit to get the connector.

There are many uses of the four-tower weather pack connector, but you have to get the one that is "keyed" for this application. There are slots and ridges that have to be in the right places. I will try again to ID the correct connector.

If some one wants to make these it is fine with me.

Jim

05-26-2015	#10
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,684	Re: Jumper to avoid being stranded with a failed Primary Fuel Pump I also had trouble finding the female connector, which is why I cannibalized an old unit to get the connector. There are many uses of the four-tower weather pack connector, but you have to get the one that is "keyed" for this application. There are slots and ridges that have to be in the right places. I will try again to ID the correct connector. If some one wants to make these it is fine with me. Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode